Parts listed below are included in the pre-packaged UV Module Maintance Kit, which can be purchased as a whole (by clicking on "Add" above) or individually by selecting each item separately below.
Part |
Description |
Part No. |
Order |
| UV O-Ring Kit |
UV Module O-Ring Kit (contains 2 of each size required for standard UV module as well as recommended lubrication) |
A 000 483 |
|
| HV + Coax Pin Block |
UV High-voltage plus Coax Pin Block (kit contains one) |
M 000 004 |
|
| Lamp Insulator, Exhaust |
Lamp Insulator Exhaust Side (kit contains one) |
M 000 057 |
|
| Lamp Insulator, Connection |
Lamp Insulator, Connection Side (kit contains one) |
M 000 197 |
|
| Shutter Shaft |
Shutter Worm Gear Shaft (kit contains one) |
M 000 106 |
|
| Gear, Left |
Worm Gear, Left Hand (kit contains two) |
M 000 107 |
|
| Gear, Right |
Worm Gear, Right Hand (kit contains two) |
M 000 108 |
|
| End Cap Protector |
Teflon Protector, Exhaust End Cap (kit contains one) |
M 000 196 |
|
| Graphaloy Bushing |
Graphaloy Bushing (kit contains two) |
M 000 233 |
|
| Socket |
3.5mm Socket, Angle (kit contains one) |
V 000 031 |
|
| Pin |
3.5mm Pin (kit contains one) |
V 000 032 |
|
| Spur Gear Pin |
Spur Gear Pin Hub, SS-4mm Bore (kit contains two) |
V 000 113 |
|
| Exhaust Spring |
Compression Spring, Exhaust Block (kit contains four) |
V 000 211 |
|
| Hypertronics Pin |
Hypertronics Pin, Male, 1.5mm (kit contains ten) |
V 000 224 |
|
| Hypertronics Body |
Hypertronics Body, 1.5mm Pin (kit contains three) |
V 000 402 |
|
| Release Spring |
Spring, UV Release (kit contains one) |
V 000 294 |
|
| Spring, Water Fitting |
Compression Spring, Water Fitting (kit contains two) |
V 000 321 |
|
| HV Wire |
HV Wire, 15KV, Silicone Insulated (kit contains 10 feet) |
V 000 353 |
|
| Sensor with Leads |
Sensor w/24 AWG 6-in Leads (kit contains two) |
V 000 403 |
|
| Shutter Motor |
Shutter Motor, Maxon (kit contains one) |
V 000 406 |
|
| Spring, Flat Wire |
Flat Wire Compression Spring, 11 Lbs (kit contains two) |
V 001 253 |
|
